Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Removing & cleaning the pre-motor filter (Hepa filter), dust filter, and air outlet filter (Hepa filter)
Warning: Always unplug the unit from electrical outlet before getting out the dust barrel.
a. Pre-motor filter & dust filter
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Take out the pre-motor filter for cleaning and changing. Take out the dust filter and use a soft brush to clean
it. Rinse with clean water and then dry thoroughly before replace it.
Note: please take the pre-motor filter out before rinse the dust filter.
Tips: how to detach the upper part from the reservoir
1. Find the lock icons on the side of the reservoir. The arrow is pointing at the locked one.
2. Turn the upper part anti-clockwise and the arrow will be pointing at the unlocked one; then lift.
b. Air outlet filter
1. Take out the air outlet filter for cleaning and changing.
Air outlet filter
- 13 -
pre-motor
filter
dust filter
Publicité
Table des Matières
