Baby Jogger city mini GT2 Mode D'emploi page 12

WARNING: Avoid serious injury from
EN
falling or sliding out. Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt.
20 Slide the harness pads up to access
plastic guide on strap.
21 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
22 Insert side strap buckle into harness
buckle on both sides.
23 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
24 Press button on crotch buckle to
release.
RECLINE THE SEAT
25 Pinch the clamp behind the seat, and
slide it down to desired recline.
26 Pull seat down on both sides to match
the clamp position. Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the pushchair seat, make sure
child' s head, arms, and legs are clear
of moving seat parts and pushchair
frame.
27 For extra ventilation, roll up the seat
back flap and secure with elastic and
button.
LEG SUPPORT
28 To use the leg support, lift the front of
the seat pad.
29 Rotate the support arm out and lower
the seat pad. Lock the support arm.
30 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
31 Press buttons on both sides of frame.
Rotate handle up.
WARNING: To prevent injury, remove
Child Tray or Belly Bar accessory when
folding or unfolding the pushchair.
NWL0000982896A City Mini GT2 DOUBLE EMEA R03 FINAL.indd 12
32 Pull up on the straps on both seats and
let the frame collapse.
33 Make sure the auto-lock lever clicks
into place.
34 Place pushchair upright in standing
position.
BASKET REMOVAL
35 From the front of the pushchair,
unsnap the 2 snaps and pull the straps
out of foot well.
36 Lift basket off the hook.
37 From the back, lift the top of basket off
the tab on both sides of frame.
38 Remove the strap from the D clamp
on both sides of frame.
REMOVING THE SEAT PAD
39 Flip the pushchair over to expose the
seat bottom.
A Unfasten the 4 fastening strips
and pull them out of the pushchair
frame.
B Unfasten the fastening strips and
pull them out of the sides of the
pushchair frame.
C Unscrew 4 carabiner hooks and
remove them from the pushchair
frame.
Unsnap 4 snaps from pushchair frame.
40
41 Starting from the bottom, slide the seat
pad out from pushchair frame on both
sides.
42 From the top, slide the seat pad out of
the frame on both sides.
43 Remove seat pad.
Reverse the steps to reattach the seat pad
to the frame.
12
7/10/19 1:40 PM