Lenze L-force 9400 Série Instructions De Montage page 53

2. Loosen the busbar screws (do not remove them completely).
3. Push the busbars as far as possible to the left towards the adjacent
busbar.
–
Ensure that there is good contact to the adjacent busbar.
4. Tighten the busbar screws.
–
Tightening torque: 3.2 ... 3.5 Nm (28 ... 31 lb−in).
5. Screw the components onto the mounting plate, if necessary.
–
Tightening torque: 3.4 Nm (30 lb−in).
EDK94ZPM113 DE/EN/FR/ES/IT 6.0
Electrical installation
l
Wiring
Connecting busbars
5
53