Sony VPL-FHZ700L Guide De Référence Rapide page 38

Installing the
Optional Adaptor
You can install the optional adaptor in
INPUT E of the connector panel section of
the projector.
Notes
• Turn off the projector and disconnect the AC
power cord from a wall outlet before
installing the optional adaptor.
• Be sure to retain the slot cover removed when
installing the optional adaptor. When
removing the optional adaptor, attach the
cover.
• For details on how to use, also refer to the
operating instructions of the optional
adaptor.
1
Turn off the power of the projector and
disconnect the power cord.
2
Slide the slot cover for the optional
adaptor attached to the connector
panel to the right and remove it.
IN P U T B R
G B
R /P
R G /Y
B /P
B
IN P U T A
18
GB
Installing the Optional Adaptor
IN P U T C D
V I- D
IN P U T D
H D M I
H D
V D
O U T P U T
M O N IT O R
Slot cover
3
Insert the optional adaptor as far as it
goes.
Example: BKM-PJ10 Digital Interface
Adaptor (not supplied)
4
Tighten the two screws on the optional
adaptor.