Mounting The Camera To The Ceiling - JVC TK-C205 Mode D'emploi

Mounting the Camera to the Ceiling

Open hole in ceiling, connect cables and mount camera to ceiling.
1. φ 20 mm
Video signal
cable
2.
Power supply cable
Safety cable
3.
Approx.10 cm
4.
Preparations
1.
Open a hole in the ceiling.
Use the template and open a hole in the
ceiling for the cables.
MEMO
There is no need to open a hole in the
ceiling when using the cable extraction
hole on the side of the camera.
( page 8)
2.
Pull out the cables from the ceiling.
Before connecting, pull out the power
supply and video signal cables about
10 cm from the ceiling.
3.
Attach the safety cable to the cam-
era. (Safety cable not included)
Attach the safety cable to the back of
the camera.
CAUTION:
• To avoid unforeseen accidents, attach
the safety cable.
• Select a suitable safety cable based on
length, strength, location, material
(insulation property), etc.
• Always use the M2.6
mounted on the unit.
4.
Remove the dome cover.
Turn the dome cover counterclockwise
and pull downwards to remove.
×
6 screws
E-11