Electromagnetic Fields (Emf); Preparing For Use - Philips GC9500 Série Mode D'emploi

EnGlish
8
- Descale the steam generator regularly according to the instructions
in chapter 'Cleaning and maintenance'.
- This appliance is intended for household use only.

Electromagnetic fields (EmF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

preparing for use

Filling the detachable water tank
Do not put hot water, perfume, vinegar, starch, descaling agents, ironing
aids or other chemicals in the water tank.
Note: Do not tilt or shake the steam generator when the water tank is full,
otherwise water may spill out of the illing hole.
You can detach the water tank and fill it at any time during use.
Fill the water tank before first use and as soon as the 'water tank empty'
light flashes.
1 Remove the detachable water tank from the steam generator.
2 Fill the water tank with tap water up to the MAX indication.
Note: If the tap water in your area is very hard, we advise you to mix it with
an equal amount of distilled water.
3 Slide the water tank back into the steam generator ('click').
Note: If the water tank is not properly placed, the iron does not produce
any steam.
Water tank refill light
When the water tank is almost empty, the 'water tank empty' light goes on
and steam ironing is no longer possible.
1 Remove the water tank and fill it.
2 Put the water tank back into the steam generator.
, The iron is ready for steam ironing again.