Fimer QUEEN 212EVO Manuel D'emploi page 44

Position
Symbol
on display
F4 key
F3 key
F1 key
(1)
/
(1)
/
(1)
/
POP UP
Description
If information needs to be
entered by the user, this but-
ton must be pressed to con-
firm the data.
Press this button in the event
user data is required and you
need to cancel the operation;
In the event there is a request
for the user to enter data, use
this button to cancel the last
digit entered;
Frequently flashes at a fre-
quency of 1Hz, meaning the
application is active; when
the machine is welding, this
means that the duty-cycle of the
same is set between [60,
100]%.
Frequently flashes at a fre-
quency of 1Hz, meaning that the
application is active; when the
machine is welding, this means
that the duty-cycle of the same
is set between [35, 60]%.
Frequently flashes at a fre-
quency of 1Hz, meaning that
the application is active; when
the machine is welding, this
means that the duty-cycle of the
same is set between [0, 35]%.
This means the information in
the pop-message is an error
message, which blocks the
machine functions.
Position
Symbol
on display
POP UP
POP UP
POP UP
(1)
(2)
(2)
Description
This means that the pop-up
message relates to an opera-
tion, carried out by the user on
the machine that requires atten-
tion (e.g. wire needs feeding or
gas leak).
This means that the information
in the pop-up message is infor-
mative (e.g. view firmware ver-
sions/SD installed on
machine).
This pop-up message is advi-
sing the user that they need to
enter more data (e.g. enter pro-
gramme name, enter lock/un-
lock keyboard password).
The replace LED symbol fla-
shes when a programme is
being loaded; once the pro-
grammed has loaded the
symbol will disappear and the
flashing LED light will come
back on.
With machines that are equip-
ped with a HF card, this
means the card will be conti-
nually activated for a duration of
more than 0.5 sec.
In machines with a vent that can
be activated by the programme,
this means that the cooling
vent is switched on.
the