Connecting To A Station - Albrecht Audio DR 460 C Guide D'instructions

2. Enter the address of a station. Refer to the "Text entry" section for details
about inputting text.
3. When finished, press Enter to connect to the station.

Connecting to a station

11.3
If the DR 460 C is successfully connected to a station, the display shows the following:
Network status
Data information
Bars show connection
Strength of the station
NOTE:
• The connection status may change from "Connecting" to "Buffering" to "Playing."
• Refer to page 61 for details about setting the buffer.
• If you shift to other menus while connecting to a station, a countdown timer
will appear at the bottom right corner of the display. After 10 seconds without
any commands, the system automatically leaves the menu and shifts back
to the station connected.
50 English
Station name
Connection status
Buffer status