Establishing A Wireless Connection - Albrecht Audio DR 460 C Guide D'instructions

Establishing a wireless connection

10.4
NOTE! This is only needed if a connection has not already been established on the
first power on or the DR 460 C needs to connect to a different network.
1. Set up your access point (AP) to receive/broadcast a wireless signal.
2. From the main menu, select Configure > Network > WiFi Configure. The names of
the receivable access points are listed. If you highlight a protected network, a key
icon will show in front of the SSID of the wireless network.
3. Select a network you have access to. If the network is not secured, press the
enter button to make a connection. If it is secured, you will be asked to enter the
passphrase.
4. Input the appropriate passphrase and press Enter to make a connection. Refer to
the "10.3 Text entry" section for details about inputting text.
46 English