Publicité
Les langues disponibles
Les langues disponibles
Remove the product from the packaging, check all the
accessories are included and follow the instructions.
Step 1: Fully charge the battery.
Connect the USB end of the cable to the adapter then plug
the adapter into a socket (230 V ~50 Hz) and the end of the
cable into the micro USB port under the product (4).
Unscrew the base to make this easier if necessary.
Press
to turn the meter on. A 30-second countdown is
shown on the display for the device to warm up and adjust.
Important: Do not adjust settings or use the meter when it is
warming up.
The battery indicator (6) indicates the progress of charging.
After shipping and removing the protective packaging, the
product must be placed in a well-ventilated area for a few
minutes prior to setting and use so the sensors are clear
and ready for use.
Imported by:
-37-
AIC International - 44980 Ste Luce sur Loire - France
Measurements are shown on the display when the
countdown is complete.
Measurements and comfort indicators for CO2.
In order to comply with user's needs, environment and
european regulations, monitor Quaelis 16 enables to
customise the CO2 concentration at which a color alarm is
displayed and sound alarm is triggered. This does not alter
the measurement system.
Default comfort indicators are set as follow:
- 0 to 600 ppm. Display is green. The air is good.
- 601 to 1199 ppm. Display is yellow. It is recommended to
ventilate the room.
- From 1200 ppm. Display is red. It is necessary to
ventilate the room.
Imported by:
AIC International - 44980 Ste Luce sur Loire - France
-38-
Publicité
