ORIUM QUAELIS 16 Manuel D'utilisation page 19

1. Settings buttons.
2. Display of measurement of CO2 concentration in ppm in
the room.
3. Display of the relative humidity of the room.
4. Micro USB charging port for the battery (under the base).
5. Display of the ambient temperature of the room.
6. Battery indicator.
Functions of settings buttons:
Imported by:
-35-
AIC International - 44980 Ste Luce sur Loire - France
ON/OFF functions to switch the meter on and off.
In standby mode: allows you to change how the
unit of temperature is displayed (°C/°F).
°C/°F
In configuration mode: allows you to increase
the display value by +1.
In standby mode: allows you to enable/ disable
the alarm.
ALM
In configuration mode: allows you to select the
display value to the left.
In configuration mode: allows you to select the
display value to the right .
Allows you to record data.
REC
In configuration mode: allows you to reduce the
display value by -1.
In standby mode: allows you to select the
configuration mode.
In configuration mode: allows you to confirm
and move to the next settings.
Imported by:
AIC International - 44980 Ste Luce sur Loire - France
-36-