Sony WEGA KLV-30MR1 Mode D'emploi page 64

To listen to Dolby Prologic system sound on the TV speakers:
Connect your Dolby Prologic system decorder amplifier to the CENTRE SPEAKER IN terminals P if
you wish to listen to the audio output from your equipment on the TV speakers. If you have a Dolby
amplifier, connect the centre output from your amplifier to the CENTRE SPEAKER IN terminals P to
use the TV speakers as a centre speaker. Next, using the menu system, select the "Features" menu and set
"TV Speakers" to "Centre in."
You can select either the TV's remote control or the external amplifier's remote control for
controlling the volume output from TV's speakers. Select the remote control by using "Audio
Output" option in the "Feature" menu (page 34).
When connecting the AV mouse
When you connect the AV mouse and install it in an external amplifier, you can use the external
amplifier's remote control toward the TV for controlling the volume level of the external amplifier.
Connect the AV mouse to the AV MOUSE IN jack O, and install it right above the external amplifier's
remote control sensor.
AV mouse
Amplifier
Remote control sensor
62
Additional Information