Sony WEGA KLV-30MR1 Mode D'emploi page 37

SmartLink The "SmartLink" option allows you to select a Scart connector that
supports SmartLink. Both Scart connectors
cannot support SmartLink at the same time.
To do this:
1
2
Select the "AV4 Input Select" option if a DVD recorder is connected to
AV4 Input Select
both the Scart connector
To do this:
1
2
Menu Colour The "Menu Colour" option allows you to alter the background colour of
the menus.
To do this:
1
2
Logo The "Logo Illumination" option allows you to illuminate the SONY logo
Illumination on the front panel of display unit in blue.
To do this:
1
2
After selecting the option, press
Press or to select AV3 or AV4.
Some DVD recorders may have 576p signal format. The Scart
connector does not accept 576p signal format on its own. If you
wish to input the signal just as it is, connect the DVD recorder to
both the Scart connector
5.
After selecting the option, press
Press or to select Auto or Manual.
Auto: The signal from the DVD recorder is input via the Scart
.
Manual: The signal from the DVD recorder is input via the Y, P
P /C jacks of 5. If the input signal from the DVD recorder is
R R
576p signal format, select this.
After selecting the option, press
Press or to select White or Black.
After selecting the option, press
Press or to select Yes.
3/
S
.
4/ and Y, P /C , P /C
B B R
4/ and Y, P /C
B
.
.
.
and 4/
jacks of 5.
R
, P /C jacks of
B R R
4/
/C ,
B B
GB
35
Menu System