Environmental Protection; Safety Measures - Felco 801-HP Manuel D'utilisation

Sécateur seul
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
User guide
EN
CONTENT
FELCO 801-HP (Pruning shear only):
If you purchased a FELCO 801-HP pruning shear without
FELCO 880 POWERPACK, the following references are
included in delivery:
• A FELCO 801-HP pruning shear
• A FELCO 801-HP user manual
• 10 circlips
NOTE:
A FELCO 880 POWERPACK is necessary for the use of
FELCO 801-HP pruning shear.
The FELCO 801 pruning shears can be equipped with
different cutting heads. The user manual applies to all
configurations.
FELCO 801 (Complete electro portable assembly):
If you purchased the complete FELCO 801 electro portable
assembly (with FELCO 880 POWERPACK), the following
references are included in delivery:
• A FELCO 801-HP pruning shear
• A FELCO 801-HP user manual
• A FELCO 903 sharpener
• A FELCO 980 spray
• A FELCO 991 grease pump
• A FELCO 880 POWERPACK
• A FELCO 880 POWERPACK user manual
• 10 circlips
DESCRIPTION
See illustration on page 3.
01 Pruning shear connection plug
02 Pruning shear cord (for electro portable FELCO pruning
shear)
03 Rucksack with 1 storage pocket
04 Control housing
05 USB power jack
06 Remote housing
07 General "ON-OFF" switch
08 Multi-purpose display
09 Li-Po 37 V - 2.5 Ah - 92.5 Wh battery
10 Pruning shear holster
11 100 VAC - 240 VAC / 50 - 60 Hz / 42 VDC - 2A battery
charger
12 Charger indicator light
13 Charger power cord
(The pruning shear power cord is suited to the country in
which the tool is sold)
14 Case
15 FELCO 801-HP pruning shear
16 Trigger
The accessories referenced or described above are not
necessarily delivered with the tool.
READ CAREFULLY
Dear Customer,
Thank you for purchasing the FELCO 801-HP electro
portable pruning shear. Under proper use and cared, this tool
shall provide you many years of satisfactory performance.
It is IMPERATIVE to read this manual in its entirety
before using the tool, or proceeding to maintenance
operations. Follow carefully the instructions and
illustrations provided in this document.
Throughout this User manual, you shall find warnings and
information with the following headings: NOTE, WARNING or
CAUTION. A NOTE provides further information, clarifies a
point, or explains a step to be followed in detail. The
WARNING, or CAUTION indication is used to identify a
procedure which, if neglected or performed improperly, can
result in property damage and/or serious injury. The
WARRANTY warning indicates that if the procedures or
instructions are not complied with, the damage is not covered
by warranty and repair costs will be borne by the owner.
No part of this manual may be reproduced without the written
permission of FELCO SA. The technical features and
illustrations in this manual are provided solely for guidance
and are not binding in any way. Company FELCO SA
reserves the right to proceed to any modification or
improvement to its products, as it deems necessary, without
any prior notification to customers who already own a similar
model. This manual is an integral part of the tool and must
accompany it in case of transfer.

ENVIRONMENTAL PROTECTION:

Your
materials which can be valorised or
recycled. Entrust these to your reseller or to
an authorized dealer so that they can be
processed.

SAFETY MEASURES

• FELCO 801-HP is a professional tool, intended
exclusively for pruning trees, bushes, shrubs and vines.
It will greatly facilitate pruning activities in arboriculture,
maintenance of parks, gardens, forests and vineyards.
• The FELCO 801-HP can be equipped with a specific
cutting head for trimming ovine and caprine hooves.
This specific feature is reserved for trained persons.
• Company FELCO SA waives any responsibility in the
event of damages caused as a result of inappropriate
use, other than the one prescribed.
• Company FELCO SA further declines any responsibility
for damages arising from the use of non-original parts
or accessories.
- 7 -
equipment
comprises
numerous

Publicité

Table des Matières
loading

Table des Matières