Urmet 1092 Manuel D'utilisation page 27

This option allows to give a name to the camera and display this name on the desired position of the
monitor.
ABCDEFGHIJK
LMNOPQRSTUV
WXYZ()<>-/#*!?,.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Put the button in the different positions to move on the desired character. Press the central button to
confirm it.
Use the arrows /
characters. Select POS and press the button to automatically quit the submenu and display the previously
selected characters. Put the button on the telecamera in the different positions to move the characters in
the desired position. Once the position has been defined, press again the button to go back to the previous
menu. To quit the menu select END.
MOTION – MOTION DETECTOR
This function allows to detect movements in the camera captured images. In this special screen, the scene
is split up into sectors, that can be activated by the user. Therefore it is possible to make some specific
points sensitive to movement (up to 4) and exclude other ones. For example, if the scene includes a door
and a window, the alarm can be activated only by a door movement, excluding any movement of the
window. In case of sudden movements (i.e. when the door opens) the operator will see a signal on the
screen. This will have the specification that was set up in correspondence to the sensitised area where the
movement happened.
Select ON to access to the following submenu:
SELECT
DISPLAY
SENSITIVITY
COLOR
TRANS
ALARM
DEFAULT
RETURN
DS 1092-186
CAM TITLE - CAMERA NAME
0123456789
CLR POS END
to move and separate the selected characters. Select CLR to delete the selected
MOTION
AREA1
COLOR
■■■■■■█■■80
WHITE
1. 00
RET
27