Urmet 1092 Manuel D'utilisation page 26

Option
BURST
IR SMART
IR PWM
This function enables a filter to reduce the image noise. Options available: OFF (to unable the function),
LOW, MIDDLE e HIGH.
This menu allows to change the functions concerning camera parameters. Select this menu item to access
to the following submenu:
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
RETURN
Option
CAM TITLE
D-EFFECT
MOTION
PRIVACY.
LANGUAGE
DEFECT
RS485
26
Value
ON÷ OFF
ON÷ OFF
1 ÷ 100
SPECIAL– SPECIAL ADJUSTMENTS
SPECIAL
OFF
OFF
OFF
ENG
RET
Value
ON ÷ OFF
FREEZE ÷ MIRROR
÷ NEG.IMAGE
ON ÷ OFF
ON ÷ OFF
ENGLISH
/
/
If set to ON, the colour burst is present even if the camera
is in black/white mode.
The IR SMART function must be used with the EXT and
B/W options and allows you to select a taken scene area
which the camera adjusts the brightness automatically in.
If ON, the camera adjusts the brightness on the selected
area in its submenus (LEVEL and AREA).
Function not available on this product
NR
This option allows to give a name to the camera using up
to 20 characters (see below).
Options available in this menu: FREEZE frame, MIRROR
the image or NEGATIVE image.
If enabled, this function allows to inform the operator
about a movement on the captured scene by displaying
an icon (see below).
If enabled, it allows to select up to 4 privacy zones (see
below).
7 languages are available
DPC function: Dead Pixel Compensation.
Function not available on this product
Description
Description
DS1092-186