Connecting To A Camera Control Unit - Sony DXC-950 Mode D'emploi

Connecting to a Camera Control Unit

DXC-950
MENU FUNCTION DATA
FLASH UP LENS
WHITE
BARS
DOWN
CCU
RGB/SYNC
VIDEO OUT REMOTE
CCU
DC IN/ GEN LOCK
REMOTE
Note
Never connect a CCU-M5 camera control unit and a CMA-
D2 camera adaptor/RM-930 remote control at the same
time; doing so could damage the equipment.
80
CCZZ-1E cable extension adaptor (supplied with CCTZ-3RGB/3YC)
or
CCQQ-1 (supplied with CCTQ-3RGB)
CCTZ-3RGB cable
or
CCTZ-3YC cable/
CCTQ-3RGB cable
CAMERA (14-pin or 26-pin)
Setting functions not available in the CCU-M5
Switch on the power to the CCU while pressing the
FUNCTION UP button on the camera. This will allow you
to make settings in the camera menu. After you have made
the settings, switch the CCU off and then back on again.
You will then be able to control the camera from the CCU.
CCZA cable (max. 300 m)
or
CCQ-AM cable (max. 100 m)
CCU-M5 camera
control unit
AC IN
Power cord