Abus TVIP21502 Manuel Utilisateur page 86

Date/time
Current date/time:
PC clock:
Date/time format:
Adjust:
Keep current settings:
Synchronize with the PC:
Manual setting:
Synchronize with the NTP server:
NTP server name:
Auto:
Interval:
Time zone:
Daylight savings time:
Accept the settings by pressing "Save" or cancel them by pressing "Cancel".
Shows the setting for the date/time currently stored in the camera.
Shows the date/time on the PC from which you access the camera.
Select a format (YYYY-year, MM-month, DD-day, hh-our, mm-minute, ss-second).
No changes to the settings
The date and time of the PC are taken over for the camera.
Manually set the time and date here.
Automatic updating of the date and time via a time server (Network
Time Protocol)
Enter the domain name of the time server (e.g. de.pool.ntp.org)
When activated, the standard time server is used. Deactivate the "Auto"
setting to enter the NTP server name manually.
Updating interval with the time server in hours
Here you select the time zone in which the camera is located.
Enter the dates here for the switch from daylight savings time to
standard time.
86