Contraindications - Dentsply Sirona Eclipse Mode D'emploi

Indications for Use
Accessory to remove
wax and aid in adhesion
to other acrylic resins for
the fabrication of dentures,
appliances and prostheses, the
repair of dentures, appliances
and prostheses, and the relining
of denture surfaces.

Contraindications

None known
Warnings
• Eclipse® Wax Remover
contains polymerizable
monomers and oligomers.
It does not contain methyl
methacrylate (MMA)
monomer.
• Eclipse® Wax Remover
contains components which
may cause skin dryness,
sensitization (allergic contact
dermatitis) or other allergic
reactions in susceptible
persons. Wear protective
gloves, eye protection and
protective clothing when
handling. Wash thoroughly
with soap and water after
direct skin contact. If
dermatitis or other symptoms
persist, seek medical advice.
• Avoid inhalation, use in a
ventilated workspace. High
vapor concentration of wash
solution in a non-ventilated
space can induce headache,
drowsiness, and irritation of
eyes and respiratory system.
Excessive long-term exposure
may be associated with other
more serious health effects.
Monitor air quality per OSHA
standards.
Inhalation: Move subject
to fresh air. Give oxygen or
artificial air as required.
Ingestion: Contact your
regional Poison Control
Center immediately.
en
• Avoid Eye Contact: Flush
eyes promptly with copious
amounts of water for 15
minutes and consult a
physician. Wash skin with
soap and water.
• Do not pour Wax Remover
into polystyrene cups.
Precautions
• Use the Eclipse Wax
Remover in a well ventilated
workspace.
• Wear solvent resistant gloves
and use brush to apply the
Eclipse Wax Remover.
This product is light
•
sensitive! Minimize exposure
to light and keep the lid on
the container to maintain its
effective use.
• Do not pour excess material
back into the bottle. This will
cause contamination and the
Eclipse Wax Remover may
become ineffective.
• Dispose of contents/
container in accordance with
local and national regulations.
Adverse Reactions
• Eclipse Wax Remover
contains components which
may cause skin dryness,
sensitization, (allergic contact
dermatitis) or other allergic
reactions in susceptible
persons.
Step-by Step Instructions
Packed Injected Acrylic
1. Fabricate an Eclipse®
Baseplate per manufacturer's
directions.
1