Connection - Kenwood KDC-X599 Mode D'emploi

Wiring connection
Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of
Battery the car
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 10)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Brown
Gray
(Mute control wire)
Gray/Black
Only for
Green
Light blue/yellow
Green/Black
(Steering remote
control wire)
Purple
Purple/Black
Blue/White
(Power control wire/
Antenna control wire)
Only for
Red
Light blue/yellow
(Ignition wire)
(Marine remote control
wire)
Yellow
(Battery wire)
Blue/White
(Power control wire)
Blue
(Antenna control wire)
MIC (Microphone input terminal) ( 13)
To connect the Kenwood navigation system,
refer your navigations manual
/ :
To the steering wheel remote control
adapter
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
:
To Kenwood Wired Marine Remote Control
unit (optional accessory)
For the latest information on marine
accessories please go to:
http://www.kenwoodusa.com/Car_
Entertainment/Marine/
To the power control terminal when
using the optional power amplifier.
(Not used)
When connecting to an external
amplifier, connect its ground
wire to the car's chassis to avoid
damaging the unit.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
27
ENGLISH