Technical Specifications - Velleman VMM005 Mode D'emploi

When done, click on the [download] button and save the .hex file to the downloads folder  C:\downloads. This
.hex file is ready to upload to the micro:bit.
Plug the micro:bit into a USB port. Now, drag and drop the .hex file onto the micro:bit [removable device] to
upload the programme. When the yellow LED on the micro:bit stops blinking, the programme is uploaded.
Remove the USB cable and power up the Power:bit (set the switch in the on position).
Now, follow the instructions on the micro:bit.
10.

Technical Specifications

operating voltage ............................................................................................. 2.7 V - 3.3 V
battery ................................................................................................................... CR2025
dimensions ................................................................................................. 42 x 52 x 5 mm
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change
without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may
be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the
copyright holder.
V. 02 – 13/03/2019
VMM005
6 ©Velleman nv