Cleaning And Maintenance; Technical Specifications - Velleman DEM106 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

8. Cleaning and Maintenance

The IR sensor is the most delicate part of the device and it shall be kept
clean at all times. To do this, only use a soft cloth or cotton bud with a
little water or medical alcohol.
Allow the lens to fully dry before using the device.
Wipe the other parts of the device regularly with a moist, lint-free cloth.
Do not use alcohol or solvents.
Do not submerge the device in water or any other liquid.
There are no user-serviceable parts. Contact your dealer for spare parts
if necessary.
The device shall be stored between –20° C and +65° C (–4° F to
+149° F).

9. Technical Specifications

temperature range
K-type
J-type
accuracy
± (0.5 % rdg + 2° C / 3.6° F) < 0° C & >1000° C
± (0.15 % rdg + 1° C / 1.8° F) 0° C ~ 1000° C (32° F ~ 1832° F)
resolution
power supply
dimensions
weight (with battery)
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 07/05/2015
DEM106
-200° C ~ 1370° C (-328° F ~ 2498° F)
-200° C ~ 1100° C (-328° F ~ 2012° F)
1° C or 1° F / 0.1° C or 0.1° F
1x 9 V battery 6F22 (incl.)
185 x 66 x 33 mm
245 g
6
©Velleman nv

Publicité

Table des Matières
loading

Table des Matières