Velleman DEM106 Mode D'emploi page 4

 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
 Readings may be affected if the unit is operated within a radio
frequency electromagnetic field, but the performance of the instrument
will not be permanently affected.
 Use the original packaging if the device is to be transported.
 Keep this manual for future reference.
4. Features
 4-digit LCD display
 dual input measurement: designed for use with an external K-type or J-
type thermocouple
 temperature readout in °C, °F or Kelvin
 dual measurement and dual display
 55 mm larger dual LCD display
 max / min function
 data hold freezes displayed values
 average function of the last 10 measured values
 auto power-off
 comes with battery, K-type probes, user manual, carry pouch and
coloured box
5. Overview
Refer to the illustrations on page 2 of this manual.
1 T1 thermocouple socket
2 LCD display
3 T1/T2 function button
4 backlight button
5 AVG button
6 data hold button
7 power switch
V. 01 – 07/05/2015
DEM106
8
9
10
11
12
13
14
4
°C/°F mode button
MIN/MAX button
setting button
T2 thermocouple socket
tripod socket
battery compartment
screw
©Velleman nv