Danby DVAC080F1WDB Manuel Du Propriétaire page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION INSTRUCTIONS
INSTALLATION IN A SLIDING WINDOW
12. Install the air conditioner.
Place the air conditioner in the window opening.
It should sit on the platform assembly so that the
window panel frame and cabinet side channels are
against the top and side window jambs.
Slide the inner window sash fi rmly against the side
of the cabinet. Make sure not to peel off the side
channel or window track foam seals. If the panel
frame does not fi t snugly against the inner window
sash, secure the panel frame to the sash with 3/4"
screws or 3/4" self threading screws. Use the
partially plugged holes in the panel frame. Drill
1/8" pilot holes for the screws.
13. Install the safety bracket.
Hook the safety bracket over the base of the cabinet
and fasten it to the front of the platform assembly
with a 3/4" self threading screw. The safety bracket
prevents movement of the air conditioner after
completing the installation.
14. Install the sash foam and window lock.
Insert the foam sash seal between the vertical sash
and the window glass. Use the window locking
bracket to lock the inner window sash to the base of
the outer window sash. Use 3/4" screw or 3/4" self
threading screw.
15. Replace the front cover.
Reconnect the coupler plugs and ensure that the
exhaust control is positioned through the front cover
in the correct location. Replace the retaining screws
on the sides of the cabinet that hold the front cover
in place.
7

Publicité

Table des Matières
loading

Table des Matières