NGM WeMOVE Polaris Guide Rapide page 23

Set up
Installing the USIM cards:
number, PIN code, carrier services numbers, contacts and other important
access the USIM slots, turn off the phone, take off the back cover by lifting it up from the
bottom, and remove the
each other simply by sliding them into their slots; follow the illustration. Slot 1 supports
WCDMA.
Installing the memory card: In order to use all functions of NGM WeMove POLARIS, it is
advisable to install a micro-SD
phone, after removing the back cover and the battery; in fact, SD card slot is placed inside
battery area, like USIM slots. Slide in the memory card so that the gold contacts are turned
downwards after unlocking the metallic
flap by sliding it towards OPEN.
When done, block it by sliding it towards
LOCK.
D
The USIM card stores information as your personal phone
battery. Insert your USIM cards with their golden contacts facing
card: the card has to be inserted in the back side of the
Slot micro SD
Warning: insert USIM and SD Cards only after
removing the battery, in order to avoid data loss.
details.
Slot 2: USIM2 (GSM)
Slot 1: USIM1
(UMTS or GSM)
ENGLISH
To
23