NGM WeMove Absolute Guide Rapide page 25

Table des Matières

Les langues disponibles

Charging the battery

Please charge the battery completely before starting to use the

device.

Use the provided

USB cable, connecting one end to the provided wall socket adaptor (placed into a socket)

and the other end to the USB connector placed on the bottom side of the

phone.

The

phone can also be charged by connecting it to a PC USB port but in that case it will charge

slowly.

While the battery is charging, an animation on screen will show the charging

progress. Once charge is completed, the icon will be filled and the phone can be

disconnected from the

grid.

Warning: Do not connect the phone to a booting-up or running down PC to avoid voltage

jumps. In order to preserve the correct functioning of the device and in order not to

compromise warranty, the sole use of original NGM battery chargers and accessories are

recommended.

Please charge the battery indoors, in a dry and favorable environment. It's

normal for the battery to get slightly warm during the charging process. The battery will

reach its full capacity when cycled several times.

Turn on, turn off and standby

Press and hold the on/off key to turn on the phone. Press and hold the same key and

confirm your intention to turn off the phone. A quick pressure of the on/off key sets the

phone on standby-mode (screen off) or allows you to go back to the standby screen (see

below).

ENGLISH

Table des Matières