Numark CD MIX2 Guide D'utilisation Simplifié page 5

PLAY / PAUSE & CUE OPERATIONS
PLAY & CUE
Press "PLAY/PAUSE" Press "CUE" return to
to start music last starting point
Play Interval Position on Disc
Back Cue Operation
Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "CUE" button will reset the disc to the last place where the disc was
started. This is called the cue point. By alternately pressing the "PLAY/PAUSE" button and the "CUE" button, the disc may be returned
and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE & CUE
Press "PLAY/PAUSE" Press "PLAY/PAUSE" Press "PLAY/PAUSE" Press "CUE" return to
to start music to pause music to start music last starting point
Position on Disc
Play Interval Play Interval
Back Cue Operation
When play has been paused and then started again, the return position for the back cue will be updated to this new position.
EDITING CUE POINT
Adjust the "CUE" point
with the jog wheel
Press "PLAY/PAUSE" Press "CUE" return to
to start music last starting point
Play Interval Position on Disc
Back Cue Operation
When the inner dial is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the
CD as you move it to the desired position. By pressing "PLAY/PAUSE" then "CUE" you can confirm that the new cue point is desirable.
5