Numark CD MIX2 Guide D'utilisation Simplifié page 32

SPECIFICATIONS
1. POWER SOURCE DC 12V, 3A
2. DIMENSIONS 445(W) x258(D) x156(H)
3. WEIGHT 5.4Kgs
4. AUDIO CHARACTERISTICS (LOAD=47K OHM FOR MASTER OUTPUT)
4-1 INPUT TERMINAL (INPUT LEVEL/IMPEDANCE):
CD -14dBV/5K OHM +/-2dB TCD-782 (Track 16)
LINE1 -14dBV/10K OHM +/-2dB
LINE2,3 -14dBV/47K OHM +/-2dB
PHONO -50dBV/47K OHM +/-2dB
MIC -53dBV/2.2K OHM +/-2dB
NOTE: 0dBV=1Vrms. Master is set to 0dBV output.
4-2 OUTPUT TERMINAL (OUTPUT LEVEL/IMPEDANCE):
MASTER OUT (RCA) 0dBV(1.0V)/600 OHM
MASTER OUT (XLR) 0dBm(815mV)/940 OHM +/-2dBV
PHONES (LOAD=32 OHM) -6dBV(0.5V)/33 OHM +/-2dBV
4-3 Max. OUTPUT (THD=10%)
MASTER MORE THAN +17dBV (7V)
PHONES (LOAD=32 OHM) MORE THAN +5dBV (1.8V)
4-4 CHANNEL BALANCE WITHIN 3dB
4-5 FREQUENCY RESPONSE:
CD/LINE 20-20KHz +1, -1.5dB TCD-782 (Track 3,7)
PHONO 20-20KHz +2, -2.5dB/RIAA
MIC 20-20KHz +1, /-3dB
4-6 OUTPUT NOISE (W/ 20KHz LPF AND IEC-A WEIGHTED)
LINE LESS THEN –75dB
PHONO LESS THEN –60dB
MIC LESS THEN –55dB
4-7 CD S/N RATIO MORE THAN 80dB TCD-782 (Track 2)
NOTE:CD 0dB OUTPUT, MASTER IS SET TO 0dBV OUTPUT.
4-8 TOTAL HARMONIC DISTORTION:
FROM MASTER OUT
CD/LINE LESS THAN 0.05% TCD-782 (Track 2)
PHONO/MIC LESS THAN 0.13%
FROM PHONES OUT (LOAD=32 OHM) LESS THAN 0.25%
NOTE: OUTPUT=0dBV,1KHz. WITH 20KHz LPF AND 200Hz HPF.
4-9 CROSSTALK:
CD MORE THAN 60dB AT 1KHz TCD-782 (Track 2)
LINE/PHONO MORE THAN 55dB AT 1KHz
PHONO WITH 20KHz LPF AND 200Hz HPF
4-10 EQUALIZER: TCD-782 (Track 15,16,17 or S.G)
CHANNEL:
LOW +6 +/- 1dB LESS THAN –5dB AT 100Hz
HI +6 +/- 1dB LESS THAN –5dB AT 10KHz
MIC1:
LOW +12 +/- 1.5dB LESS THAN –10.5dB AT 100Hz
HI +12 +/- 1.5dB LESS THAN –10.5dB AT 10KHz
MASTER:
LOW +10 +/- 1.5dB LESS THAN –8.5dB AT 100Hz
MID +10 +/- 1.5dB LESS THAN –8.5dB AT 1KHz
HI +10 +/- 1.5dB LESS THAN –8.5dB AT 10KHz
5. ENVIRONMENTAL CONDITIONS
(1) Operating Temperature 5 to 35 deg. C
(2) Humidity 25 to 85% RH (non-condensing)
(3) Storage Temperature -20 to 60 deg. C
32