Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Time
Example: 16.34 = Display of time.
The time is set by pressing enter and the navigation keys. Press the key again to switch between
minutes and hours.
Time
The correct setting of date and time can be useful even if the time windows are not
NOTICE:
used. If a data recording is performed using the data logger (D-LOGGUSB or BL-USB),
an allocation of time-related data is only possible with the correct date and time.
Power reserve in the event of a power failure: at least 1 day, typically 3 days
DATE
In this menu, you can set and read the day, months, and year. You can also switch between
summer and winter time manually or automatically.
Month and day
Month (Example: May the 17
M05 17
than 30, the day is reset to 1 to ensure that the day is possible.
Day: The days are set according to the months and year (leap year).
Y 2011
Year
Automatic switch between summer / normal time (ex works = AUTO)
AUTO
Setting possibilities: AUTO switch is automatic depending on Date and time
The date and time have to be set correctly for the automatic switch from normal and
NOTICE:
summer time to work properly.
Time window TIME W (3 times)
Setting of 3 time windows
A total of 3 time windows are available.
For each time window, the outputs that affect the window can be freely set.
Each output can have up to 3 time windows assigned to it. If an output is released in a time window
(between the switch-on / off times), the remaining time windows do not affect this output any longer.
Year
th
): If the month is changed back and the day is greater
NORMally there is no deference to summer time
English
Summer / winter
time adjustment
27
Publicité
Table des Matières
