Code Number Code; Software Version Ver; Program Number Pr; Linking Of Outputs Lo - Technische Alternative UVR 63 Mode D'emploi Et Instructions De Montage

Masquer les pouces Voir aussi pour UVR 63:

Table des Matières

Les langues disponibles

English

Code to enter menu

Code number CODE

The other menu items of the parameter menu are only displayed after input of the correct

code number (code number 32).

Display of the software version. It cannot be changed as it indicates the intelligence of the

device and must be provided if there are any queries.

Program selection according to the selected hydraulic diagram (WE = 0)

Further functions can be added to the described programs. The described functions apply

together. "All programs +1 (+2, +4, +8)" indicates that the selected program number can be

increased by the sum total of these numbers.

Example: Program 48 +1 + 2 = Program number 51 = solar thermal system with 2

consumers, with pump-valve system and additional sensor S4 for the upper limit.

Possibility to cancel out the numbered outputs listed in the program diagram against each

other (A1 with A2, A1 with A3 or A2 with A3). By this means it is possible to assign the speed

output at will. (ex works = OFF)

Link OFF

IMPORTANT: All outputs set in menu functions relate directly to the terminal outputs and not to the

program diagram. This means that if an output is cancelled this is to be taken into

account for parameterization of the functions.

Version number

Link A1 and A2

Program number

Link A1 and A3

Table des Matières