UWELL Hypercar KIT Manuel D'utilisation page 73

UWELL Whirl – Using the Device
Changing the Atomizer Head
1. Disconnect the clearomizer from the battery/box mod of your e-cigarette.
2. Turn it so that the mouthpiece points to the floor. Remove the atomizer head
base with Airflow Control by turning counterclockwise from the glass tank of
the unit.
3. Remove the old atomizer head by pulling it out and replace it by a new one.
The red o-rings must still be properly seated to prevent leakage of e-liquid.
4. Finally, reconnect all parts and make
sure no e-liquid can escape. Screw
the clearomizer back to the battery
and give the new vaporizer head
plenty of time to absorb e-liquid.
71