Charging The Device - UWELL Hypercar KIT Manuel D'utilisation

UWELL Hypercar – Using the Device
64

Charging the Device

Connect the device to a PC or notebook via the supplied Micro-USB cable.
While charging, the status message „Charging" will be displayed, when charging
is completed „Fully Charged" will appear.
Power On / Off
Press the Fire button 5 times in quick succession to turn the device on. Turn it off in
the same way, by pressing the Fire button quickly 5 times. We recommend turning
the device off during transport or if it will not be used for a long period of time.