Releasing The Evaporating Flask From The Vapour Tube - Heidolph Laborota 4000 efficient Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4.5.8
WARNING
CAUTION
1.02
4. Guide the guard hood with your hand.
5. Turn the black knob clockwise toward lock.
The immersion depth of the evaporating flask is now locked.

Releasing the evaporating flask from the vapour tube

Danger of glass breakage!
Risk of severe injury due to broken glass.
Check glass parts for damage (cracks, chips, etc.)
Use only glass parts that are in flawless condition.
Handle with care.
Drive rotating unintentionally!
Danger of injury to hands.
Ensure that the rotation is turned off.
The evaporating flask must be cool.
1. Raise the evaporating flask from the bath (see chapter 4.4.5, page 85)
2. Hold the evaporating flask and release the clip.
3. Hold the locking button (see chapter 4.5.2, page 88)
4. Turn the nut on the vapour tube (Fig. 4-5 (7)) anticlockwise until the
evaporating flask is released.
5. Let go of the locking button.
Laborota 4000/4001 efficient, 4010/4011 digital, 4002/4003 control
Setup and initial use
95

Publicité

Table des Matières
loading

Table des Matières