Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART
TYPE
A
HEX SOCKET BOLT
4
5
3
2
DESCRIPTION
QTY
M8X1.25PX60L
3
A
A
Open HARDWARE FOR STEP 2.
B
Slide RIGHT CONSOLE MAST BOOT (5) on to
RIGHT CONSOLE MAST (4).
Pull CONSOLE CABLE (3) away from the treadmill
C
base frame. Connect the CONSOLE CABLE (3)
from the MAIN FRAME (2) to the CONSOLE
CABLE (3) in the bottom of the RIGHT
CONSOLE MAST (4). The other end of the
CONSOLE CABLE (3) should be located at the
top of the mast.
D
Attach RIGHT CONSOLE MAST (4) to MAIN
FRAME (2) using 3 BOLTS (A).
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
NOTE: Do not fully tighten bolts until STEP
5.
A
11
Publicité
Table des Matières
