Operation; Cleaning And Maintenance - EuroLite Strobe Police Beacon Mode D'emploi

If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
Attention: The operation of warning beacons in Germany is permitted only in non-public areas.
Use in whole public area (streets, roads, and plazas) is prohibited!
This prohibition applies also to areas immediately adjoining public traffic, since an endagering of
the traffic flow cannot be excluded!

OPERATION

Regarding the article numbers 50603600 or 50603605: Install the device on a plane surface.
Regarding the article number 50603620: Mount the item on the rear view mirror of the automobile with the
fastening belts. The desired flash mode can be selected via the function switch.
Connect the Strobe Police Beacon to the cigarette lighter with the plug and the lamp begins to flash.

CLEANING AND MAINTENANCE

DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
10/19 50603600_V_1_1.DOC