Changing The Language Setting - Sony HDR-CX300 Mode D'emploi


Notes
The date and time does not appear during recording, but they are automatically recorded on the

recording media, and can be displayed during playback. To display the date and time, touch
(MENU)  [Show others]  [PLAYBACK SET] (under
CODE]  [DATE/TIME] 
You can turn off the operation beeps by touching

[GENERAL SET] category)  [BEEP]  [OFF] 
SET] (under
If the button you touch does not react correctly, calibrate the touch panel.

Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO

AREA ADJ] set to [ON]. The clock may not be adjusted to the correct time automatically, depending
on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and [AUTO
AREA ADJ] to [OFF] (HDR-CX350V/XR350V).
To turn off the power
Close the LCD screen. The
off.
Tips

You can turn off your camcorder also by pressing POWER.

When [POWER ON BY LCD] is set to [OFF], turn off your camcorder by pressing POWER.


Changing the language setting

You can change the on-screen displays to show messages in a specified language.
(MENU)  [Show others]  [CLOCK/
Touch
category)  [ LANGUAGE SET]  a desired language 
 
(MENU)  [Show others]  [SOUND/DISP
(Movie) lamp flashes for a few seconds and the power is turned
[PLAYBACK] category)  [DATA
.

LANG] (under


.
[GENERAL SET]

.
US
1