Setting The Language And The Clock - Sony Alpha 1 ILCE-1 Mode D'emploi

5: Setting the language and the clock

1
Set the ON/OFF (Power) switch to "ON" to turn on the camera.
2
Select the desired language and then press the center of the
control wheel.
3
Make sure that [Enter] is selected on the area/date/time
confirmation screen, and then press the center of the control
wheel.
4
Select the desired geographic location, set [Daylight Savings],
and then press the center.
• [Daylight Savings] can be switched on/off using the top/bottom of
the control wheel.
5
Set the date format (year/month/day), and press the center.
6
Set the date and time (hour/minute/second), and press the
center.
• To set the date and time or geographic location again at a
later point, select MENU 
[Area/Date/Time Setting].
Note
• The built-in clock of the camera may exhibit time errors. Adjust the time at
regular intervals.
ON/OFF (Power) switch
Control wheel
(Setup)  [Area/Date] 
GB
GB
9