Whirlpool cabrio Série Guide D'utilisation Et D'entretien page 10

Masquer les pouces Voir aussi pour cabrio Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.
Touch POWER to turn on washer
Make sure the dispenser drawer is closed completely, then
touch POWER to turn on the washer.
8.
Select type of load
Touch what to wash based on the items
you are washing. Estimated Time
Remaining will light up with a cycle time.
You may notice time adjusting during the
cycle. This is normal.
If you do not want to begin a cycle
immediately, you may choose
DELAY START option.
To choose a delay time:
1. Touch DELAY START button to select desired delay time.
2. Touch START/PAUSE.
To cancel delaying a cycle:
1. Touch START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE
detergent only in the dispenser. Powdered detergents may
absorb moisture from a previous cycle and clump before
the wash cycle begins.
9.
Select wash method
After selecting your cycle form the What to Wash then you
can select how you want to wash your items.
10
10.
Select cycle modifiers
Once you select a cycle, the default modifiers for that cycle will
be lit. Touch the cycle settings buttons to change the Soil Level,
Spin Speed, and Temperature, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your items.
Temperature
Hot
Some cold water is added
to save energy. This will be
cooler than your hot water
heater setting
Warm
Some cold water will be
added, so this may be cooler
than what your previous
washer provided.
Cool
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to
help dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils

Publicité

Table des Matières
loading

Table des Matières