JVC AV-32WFT1EP Manuel D'instructions page 26

Press the



button to change the Pro-
4
gramme number (PR) of a TV channel to a
new Programme number (PR).
       
Press the   buttons to choose a TV
 
1
channel.
Every time you press the

number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR) ap-
pears on the screen.
2
Press the red button to start the ID func-
tion.
Press the    buttons to choose the first 
3
character of a Channel name (ID) you want
to attach to the TV channel.
4
Press the blue button to display the ID LIST
(channel name list).
Press the   buttons to choose the Chan-
 
5
nel name (ID).
To cancel the ID function:
 
 
Press the (Information) button.





6
Press the button to register a Channel
name (ID) to a TV channel.


buttons, the Programme

Note:
• You can register your unique Channel name (ID) to
the TV channel. When step 3 is completed, do not
go to step 4, but press the
   
cursor and the buttons to choose a character for
completing the Channel name (ID). Then press the





button to register the Channel name (ID) to the TV
channel.
                   
Preparation:
• A CH/CC number unique to this TV and corresponding to
the Channel number of a TV channel is required. Find the
corresponding CH/CC number from a table "CH/CC
NUMBER" on page 32. based on the Channel number of the
TV channel.
• When the COUNTRY setting is not FRANCE, use a two-digit
CH/CC number. When the COUNTRY setting is FRANCE,
use a three-digit CH/CC number.
• Only when you add a TV channel (SECAM-L system) from
a French station, be sure to set COUNTRY to FRANCE. If
the COUNTRY setting is not FRANCE, follow the descrip-
tion "Changing the COUNTRY setting" on page 28 to
change the COUNTRY setting to FRANCE, then start the
INSERT function.
Press the   buttons to choose a Pro-
 
1
gramme number (PR) for which you will
register a new TV channel.
2
Press the green button and start the IN-
SERT function.
Press the   buttons to choose "CC" or  
3
"CH" according to the CH/CC number of
the TV channel.
When the COUNTRY setting is FRANCE:
Choose "CH1", "CH2", "CC1" or "CC2".
To cancel the INSERT function:
Press the   (Information) button.  
4
Press the Number buttons to enter the re-
maining CH/CC number.
The TV shifts to registration mode.
When the registration is completed, the picture of the TV
channel appears on the screen.
Note:
• The CH/CC number is a number indicating the
broadcast frequency to the TV. If the TV cannot de-
tect the TV channel corresponding to the broadcast
frequency indicated by the CH/CC number, a pic-
ture in the no-signal state appears.
INSTALL





buttons to move the