Features - JVC AV-32WFT1EP Manuel D'instructions

FEATURES

5
Press the blue button and set the CHILD
LOCK function.

(CHILD LOCK) appears and the TV channel is locked.
To reset the CHILD LOCK function:
Press the blue button again.

(CHILD LOCK) disappears.


6
Press the
ting.
The menu disappears.
Note:
• To disable easy resetting of the CHILD LOCK func-
tion, the menu disappears by choosing the CHILD
LOCK function and pressing the
ordinary menu operation.
        ! ! ! !     " " " " # # # #                    
1
Choose a Programme number (PR) in
which a TV channel locked with the
Number buttons or PR LIST.
The screen changes to blue and the
appears. You cannot view the TV channel.
Press the  (Information) button to
2
display "ID NO." (ID No. input screen).
3
Press the Number buttons to enter the ID
number.
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of "To set the CHILD LOCK function". Af-
ter confirming the ID number, press the
the menu.
Note:
• Even if you reset the lock temporarily, it does not
mean that the CHILD LOCK function set for the TV
channel is cancelled. The next time anyone at-
tempts to view the TV channel, it will be locked
again.
• When you would like to cancel the CHILD LOCK
function, you must perform the operation "To set the
CHILD LOCK function" again.
• To disable easy choosing of a Programme number
(PR) in which a locked TV channel has been regis-
tered, the Programme number (PR) has been set
that it cannot be chosen by the
operation buttons at the TV.
• To disable easy resetting of the lock, "ID NO." (ID
No. input screen) is set so that it cannot appear un-
less you press the

button to complete the set-

button as in the

(CHILD LOCK)

button to exit

buttons or the


(Information) button.
                            & & & &     + + + +



' ' ' ' , , , , ) ) ) )
Only when connecting a Decoder with a T-V LINK compatible
VCR connected to the EXT-2 terminal, you can use this func-
tion. To operate this function, see "Using the DECODER
(EXT-2) function" on page 28.
Caution:
• If you have not connected a Decoder with a T-V LINK com-
patible VCR connected to the EXT-2 terminal, setting this
function to "ON" by mistake causes the picture/sound of a
TV channel you are currently viewing not to be issued.