Battipav EXTRA 3300 Superlunga Mode D'emploi page 29

Battipav srl
CAUTION
• Danger of presence of electric current.
The machine has an internal electric system:
CONNECT THE MACHINE TO A SYSTEM WITH
DIFFERENTIAL PROTECTION AND EFFECTIVE
EARTH WIRE.
CAUTION
• Danger of prolonged exposure to noise:
The continuative use of the machine causes an
exposure to noise levels above 85 dB (A).
OPERATORS MUST
DEFENDERS.
CAUTION
• Danger of exposure
materials. OPERATORS
PROTECTIVE GOGGLES.
CAUTION
• Danger of accidental contact with the moving
tool.
OPERATORS MUST WEAR HEAVY PROTECTIVE
GLOVES
ALWAYS STAY IN THE WORKING POSITION
(Pos. 1 picture 19) DURING THE MACHINE
OPERATION PHASES:
• During material loading;
• During material cutting;
• During the cutting tool deceleration following the
machine stop.
MAINTENANCE
CAUTION
BEFORE PERFORMING ANY OPERATION OR
ADJUSTMENT, DISCONNECT THE MACHINE FROM
THE SUPPLY MAINS.
USE PROPER EAR
to fragments
MUST WEAR
CLEANING
CAUTION
DO NOT WASH THE MACHINE WITH HIGH
PRESSURE WATER JETS
28 It is extremely easy to clean the EXTRA saw by
loosening the locking nuts and removing the
working table. Through the side tap remove any
working residual.
CAUTION
AFTER THE TANK CLEANING OPERATIONS,
29
PLACE THE WORKING TABLE BACK IN
POSITION, OBSERVING THE DISTANCE FROM
THE LEG SUPPORT.
For a greater efficiency of the patented
30 31
of
SPRAY SYSTEM lubrication system, clean
it regularly as indicated.
CAUTION
MOTOR CARRIAGE ADJUSTMENT
The motor carriage is provided with a register for the
vertical play adjustment.
For correct adjustment, proceed as follows:
• with a 3 mm Allen wrench, screw both front
32
adjustment dowels (A), until the play is
eliminated.
• repeat the operation for both back adjustment
33
dowels (B).
CAUTION
TIGHTEN THE FOUR REGISTERS EQUALLY IN
ORDER TO OBTAIN SUITABLE SMOOTHNESS.
GB
29