Machine Description; Technical Data - Battipav EXTRA 3300 Superlunga Mode D'emploi

Battipav srl
2
D
A

MACHINE DESCRIPTION

The EXTRA site cutter is a machine intended
specifically for cutting ceramics, single-fired items,
terracotta, and marble (Max thickness 20 mm), up to
a thickness of 65 mm.
The machine uses a wet diamond tipped tool cutting
system and is intended for personnel specialized in
the construction sector.
The operator works in front of the narrow side of
the machine, within reach of the operating controls,
and positions the material to be cut on the moving
worktop. He/she starts the machine and moves the
cutting head to bring the tool into contact with the
material.

TECHNICAL DATA

Voltage:
Power absorbed:
Admissible working conditions:
30s
30s
Rotation speed:
Condenser:
Thermal circuit breaker:
IP Degree:
B
E
C
230V 50Hz~
1400 W
INTERMITTENT S3 SERVICE
under load running
2800 min-1
RECOMMENDED USE:
CUTTING TOOL
DIAMOND BLADE WET CUTTING
CONTINUOUS CROWN:
ceramic, single-fired ceramic, cotto and marble
THE TOOL / MATERIAL TO BE CUT MATCHES ARE
PURELY INDICATIVE.
ALWAYS
INDICATIONS PROVIDED BY THE CUTTING TOOL
MANUFACTURER BEFORE ANY APPLICATION.
Water recirculation pump:
The noise emitted by these machines was
measured on production samples in compliance
with ISO 3745-77 standards.
The machine was positioned on an H800 (mm)
auxiliary table.
The samples comprised 314x314x8 (mm) singlefi
red tiles, mod. P3T287 1200 °C. K = 2, \[ dB ], pr
EN 848 - 1
Sound:
LOADLESS VALUES
Lw
Lpm
UNDER LOAD VALUES
Lw
Lpm
In working conditions, the machine creates a noise
emission above 85 dB(A).
INSTALLATION
TRANSPORT / HANDLING
Move the EXTRA saw by using the specially provided
side handles.
repose
3
Before moving the machine make sure that:
• The motor slide is locked in place at the centre
20 µF
of the machine with the two cutting adjustment
170°C knobs on the slide rail.
• The motor slide is completely lowered and locked
54
with the locking lever.
FOLLOW THE INTENDED
S0 230V 50/60Hz
(Art. 66900, 661050)
S1 230V 50/60Hz
(Art. 661350, 661351)
72,4 [dBW(A)] 0,0 [mW(A)]
61,5 [dB(A)] 61,5 [dB(C)max]
101,5 [dBW(A)] 14,3 [mW(A)]
92,0 [dB(A)] 100,7 [dB(C)max]
GB
USE
25