Battipav EXTRA 3300 Superlunga Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Battipav srl
Store your tools in a save place
When not in use, tools should be stored in dry and
save places, out of the reach of children.
Don't force tool
It will function better and in a safer way at the rate
for which it was intended.
Use the right tool
Don't use low duty tools or accessories to do
the job of a heavy-duty tools. Don't use tools for
purposes not intended.
Dress properly
Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear
protective hair covering to contain long hair. Use
safety glasses.
Use a mask if working operations are dusty.
Don't abuse cord
Never carry tool by cord or yank it to disconnect it
from socket.
Keep cord from heat, oil and sharp edges.
Avoid unsteady positions
Be sure to work in a safe and balanced position.
Maintain tools with care
Keep tools sharp and clean for better and safer
performance.
Follow all maintenance advice and instructions to
replace accessories subject to wear. Inspect tool
cords periodically and, if damaged, have them
repaired by an authorised expert. Check extension
cords periodically and replace them if damaged.
Keep handles dry, clean and free from oil and
grease.
Disconnect tools
When not in use, before servicing, and when
changing accessories subject to wear.
Remove service keys from tool
Form the habit of checking to see that keys and
adjusting wrenches are removed from tool before
turning it on.
Avoid unintentional starting
Be sure that the switch is off when plugging in the
tool.
Extension cords for outdoor works
When tool is used outdoors, use only extension
cords intended for this particular use and so
marked.
Stay alert
Watch what you are doing. Use common sense.
Do not operate tool when you are inattentive.
Check tool for damaged parts
Before further use of the tool, check it and the
safety devices for damages and be sure that
they operate properly. Check for functioning
and binding of moving parts, breakage of parts,
correct mounting, and any other conditions that
may affect the correct operation of the tool.
Damaged safety devices or other parts should
be properly repaired or replaced by an authorised
Service
Centre
elsewhere in this instruction manual.
Have
defective
authorised Service Centre.
Do not use tool if its switch cannot be turned on or
off.
Warning
For your personal safety use only accessories
recommended in this instruction manual or in
the relevant catalogues The use of any other
accessory or attachment other than those
recommended in this instruction manual or in the
relevant catalogue may present a risk of personal
injury.
Have tools repaired by qualified personnel
This electric appliance is in accordance with
the safety rules in force. Only qualified experts
may carry out repairing of electric appliances
otherwise it may cause considerable danger for
the user.
unless
otherwise
indicated
switches
replaced
GB
by
an
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

6733001

Table des Matières