Site Selection - EXIT Toys FRAME POOL 12FTX30IN Mode D'emploi

4.0 Site selection

WARNING: Pools installed on inadequately level surfaces are subject to leaking,
forming irregularities, or collapse, which can result in property damage or serious in-
jury for those in or around the pool area!
WARNING: Do not use sand during setup process. If it appears that there is a need
for use of a "leveling agent", then your set-up site is likely unsuitable. FAILURE TO
OBEY THIS WARNING MAY RESULT IN SERIOUS PERSONAL INJURY.
CAUTION: Please choose your set-up area carefully, as lawn and other desirable
vegetation underneath the ground cloth (If applicable) will die. Furthermore, try to
avoid setting the ground cloth (If applicable)in areas prone to aggressive plant and
weed species, as they may grow through the ground cloth (If applicable).
CAUTION: The pool must be accessible to a 110 or 230-volt AC outlet protected
by a Ground Fault Circuit Interrupter (GFCI). The pool should be set no closer than
10 ft. to the power source, but no further than the length of the filter pump cord.
Under no circumstances should an extension cord be used to extend the range of the
connection.
It is absolutely essential to select a suitable site for your pool
BEFORE attempting to fill it with any water. Please select a set-up
site which strictly conorms to the following guidelines:
Guide 1. Ensure that the area is firm,flat(no bumps or mounds of earth) and
extremely level, with a grade not exceeding 3° of slope at any point in the set-up
area.
Guide 2. Make sure that the area you have selected to set-up the pool is completely
free of sticks, stones, sharp objects or other foreign debris.
Guide 3. Select an area that is not directly underneath overhead power lines or
trees. Additionally, make sure that the pool set-up area does not contain underground
utility pipes, lines, or cables or any kind.
9
MSP-30103-V01
Stay away from drains
& suction fittings
Your hair,body & jewelry can get sucked into drain.
You could be held under water & drown!