Siemens S1 RKM 10012 Mode D'emploi page 32

6
18. 0 18. 0
start stop
32
"Manual" : Ventilator speed can be set
manually to five different levels. The symbol
flashes to indicate that the ventilator speed can
be modified. You have two seconds to select
the desired speed using buttons
>
(up). When the button in the figure marked
with an arrow is pressed, the LCD screen
indicates the ventilator speed selected. If the
"speed" button is pressed again, the symbol
flashes once more and you have two seconds
to modify the ventilator speed.
"Turbo" : Temperature regulation is
performed automatically when "turbo" is
selected. The appliance starts up at 100%
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels. Depending on room
atmosphere conditions, the appliance operates
at between 100% and 50% maximum power
when set to "turbo".
"Silent" : Temperature regulation is
performed automatically when "silent" is
selected. The appliance starts up at 50%
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels. When set to "silent",
the appliance works very silently at a power of
between 2.350 W and 1.950 W.
The appliance lowers the temperature and dries
the air in the room at the same time in order to
create ideal air conditions.
If the appliance turns itself off automatically via
thermostat, then it is necessary to wait until room
temperature rises 2°C before it comes back on
again.
Condensed water formed during air conditioning
evaporates automatically and is expelled
outdoors, together with hot air, through the hot-
air expulsion duct. In conditions of extreme
humidity, the appliance accumulates condensed
water in an internal tank. When the water in the
tank reaches a certain level, the appliance turns
itself off automatically and the red indicator light
flashes to indicate that the tank needs to be
emptied.
<
(down) and