Setting The Display Screen; Setting The Touch Field Color; Setting The Touch Field Tone Type; Setting The Touch Field Tone Volume - Gaggenau RF411704 Notice D'utilisation

Setting the display screen

You can choose between the settings Reduced and
Standard. With the setting Reduced only the temperature
and active special functions are displayed on the control
panel after a short period without operation. If the touch
fields are touched, all keys will be visible again.
With the setting Standard all keys always remain visible.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
Press C button to move to the menu item Display
4.
screen.
Press % button.
5.
6. Press B C buttons to move to the required setting.
Press ™ button.
7.
The setting is saved.
8. Press ' button to exit the menu.

Setting the touch field color

Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press C button to move to the menu item Touch field
4.
color.
5. Press % button.
6. Press B C buttons to move to the required setting.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.

Setting the touch field tone type.

You can change or switch off the sound of the tones
generated when pressing keys.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button to open the menu item.
4. Press C button to move to the menu item Touch field
tone type.
5. Press % button to open the menu item.
Press B C buttons to select the required setting.
6.
7. Press ™ button.
The setting is saved.
8. Press ' button to exit the menu.

Setting the touch field tone volume

You can adjust the volume level of the sounds generated
when pressing keys.
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
Press ™ button to open the menu item.
3.
4. Press C button to move to the menu item Touch field
tone volume.
5. Press % button to open the menu item.
Press B C buttons to select the required setting.
6.
7. Press ™ button.
The setting is saved.
Press ' button to exit the menu.
8.

Setting the signal tone volume

You can adjust the volume level of the signal tones
generated e.g. with alarms.
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button to open the menu item.
Press C button to move to the menu item Signal tone
4.
volume.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.
Operating the appliance
en-us
17