Transporting The Instrument - VITLAB Dispenser TA2 Mode D'emploi

3. Mounting and aligning the instru-ment on a bottle
Screw the instrument (GL 45 thread) onto the reagent bottle and then
align the discharge tube with the bottle label by turning the valve
block (Fig. 3). To prevent tipping over use a bottle stand for small
bottles (page 47).
Note:
For bottles with other thread sizes, select a suitable adapter. The
adapters supplied with the instrument are made of ETFE and PTFE.
4.

Transporting the instrument

When mounted to a reagent bottle, always carry the instrument as
shown in the figure (Fig. 4)!
Warning:
Always wear protective gloves when touching the instrument or
the bottle, especially when using dangerous liquids (e.g. HF).
3
4
33