Korg SP-300 Mode D'emploi page 34

Set the data filer to send the sound setting data that were previously saved from the
3
SP-300. Please read the data filer owner's manual for details on data transmission.
The SP-300 will receive the data.
When the data dump is finished, the SP-300 will return to the same status it was
before the data dump.
During a data dump operation, the SP-300 will not produce sound, and no other
function will work.
You may cancel a data dump operation before the data dump begins, by pressing the
TRANSPOSE/FUNCTION or VIBES/GUITAR button.
32
Chapter 5