Recommendations For Use - EXALTA EL-057 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
1. Titanium plates
2. Spiral curling guides
3. Anti-scald point
4. LED Display
5. Adjustable temperature switches
6. ON/OFF switch
7. Plate lock for storage
8. Swivel cord: 3m
CAUTION
The plate becomes very hot in a few seconds. Avoid any contact
between the hot surfaces of the appliance and skin, especially
ears, eyes, face and neck after having connected the appliance
to the power supply.
The plate becomes very hot if set to the maximum temperature
and hence should be done very carefully because if improperly
used or if the temperature is not correctly selected the appliance
may overheat or even burn the hair. When you use the plate for
the first time, always select a moderate temperature and do a test
on a lock of hair to verify that the selected temperature is suitable
for your hair type.
INSTRUCTIONS FOR USE
Before starting use the hair straightener, it is advisable to wash
your hair, than squeeze excess water by your hand and then
towel-dry the hair. Disentangle your hair by a comb, and then
dry, pulling your hair by a brush. Once your hair is completely
dried, you can start straightening.
Never use the product if your hair is still wet.
Plug into the power outlet and turn on the element by pressing
down the on / off button for a few seconds and the default
temperatures is displayed. Select the desired temperature using
the + and - buttons to increase or decrease the temperature,
then proceed with the desired styling. The range of selectable
temperature goes from 120° C to 230° C.
After use, keep the on / off button pressed to turn the element off.
Always wait for the element to cool completely before storing.

RECOMMENDATIONS FOR USE

Divide hair into sections before proceeding with styling and start
from the lower strands.
13

Publicité

Table des Matières
loading

Table des Matières