Cleaning The Accessories; Making Settings On The Hob; Advance Cleaning Of Burner Cup And Cap; Igniting The Gas Burners - Bosch HGA3321.0M Notice D'utilisation

Cleaning the accessories

Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.

Making settings on the hob

Your hob is equipped with four gas burners. The following
information explains how to light the gas burners and set the
size of flame.

Advance cleaning of burner cup and cap

Clean the burner cap (1) and cup (2) with water and washing-
up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
damaged.
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.

Igniting the gas burners

Always position the burner cap exactly onto the burner cup. The
openings in the burner cup must remain unobstructed at all
times. All parts must be dry.
Open the upper cooker cover. The upper cover must remain
1.
open whilst the cooker is in operation.
Turn the control for the required hotplate anti-clockwise to the
2.
symbol with the large flame
With the hotplate control pressed in, press the ignition button.
3.
Gas begins to flow out and the gas burner ignites.
Example
Melting
Warming
Heating and keeping
warm
Steaming*
Braising*
Boiling*
* If you are using a pan with a lid, turn the flame down as soon as it reaches boiling point.
** Optional. Available for some appliances, depending on the appliance model (for frying on the wok burner, we recommend that
you use a wok)
32
— .
Food
Chocolate, butter, margarine
Stock, tinned vegetables
Soups
Fish
Potatoes and other vegetables,
meat
Rice, vegetables, meat dishes
(with sauces)
Press and hold the hotplate control for 1-3 seconds. This
4.
activates the safety pilot. If the gas flame goes out, the gas
supply is automatically cut off by the safety pilot.
Set the required flame size. Between the Off
5.
setting, the flame is not stable. Therefore, always choose a
—
setting between the large flame
If the flame goes out again, repeat the process from step 2.
6.
To finish cooking, turn the hotplate control clockwise to the
7.
Off position.
û
The hotplate control should not be turned to the ignition
position for longer than 15 seconds. If the burner does not light
within 15 seconds, wait at least one minute. Then repeat the
ignition process.
The gas burner does not ignite
If there is a power cut or if the ignition plugs are damp, you can
light the gas burners with a gas lighter or a match.
Table – Cooking
Select the right pan size for each hotplate. The diameter of the
pot or pan base should be the same as that of the hotplate.
Cooking times may vary depending on the type of food, its
weight and quality. You yourself can best judge the optimal
cooking time.
Use as little water as possible when cooking, so that the food
retains its vitamins and minerals. Select short cooking times so
that the vegetables remain firm and full of nutrients.
Hotplate
Economy burner
Standard burner
Electric hotplate**
Economy burner
Electric hotplate**
Standard burner
Electric hotplate**
Standard burner
Electric hotplate**
Standard burner
Electric hotplate**
setting and the
û
and small flame
—
Heat setting
Small flame
Small flame
1-2
Small flame
1-2
Between large and small flame
3-4
Between large and small flame
3-4
High flame
5-6
.
˜